The best desktop 3D printer from Snapmaker, a modular 3D printer, comes with exciting 3-in-1 capabilities such as 3D printing, laser engraving or cutting, and CNC carving. Therefore, how is this machine assembled after purchase? In this article, we will help you get a short and straightforward guide on how to set up your metal 3D printer. The procedures include;
· First, get your screwdriver ready where a head of H2.5 is used to assemble the machine, and others are used for maintenance.
· Attach the feet to the Base plate; here, expect to have four M4 X 10 Hex Socket head screws, four feet, and one base plate.
· Then ensure that the sliders are aligned with each other, move them until they align but at the same time hold the linear module carefully to prevent them from falling, and do not press the steel strip.
· Attach the Y axes to the platform but do not tighten the screw. But make sure to assemble the platform in the correct orientation.
· Attach the Y axes to the Base plate. Though make sure the Y-axis linear module is mounted accurately onto the grooves of the base plate.
· Now tighten the screws on the Y-axis sliders.
· Attach the Z-axis holder to the base plate.
· Attach the touchscreen holder to the base plate.
· Thread the connecting cables through the holes of the holders, then attach the Z axes to the Z-axis holder. Do not tighten the screw yet.
· Install the screw to the bottom of the Z axes.
· From the middle, move the platform to the position, then move the Z-axis slider to the farthest end.
· Attach the X axis to the slider on the Z axes.
· Tighten the screws attaching the Z axes to the Z axis holder.
· Tighten the screw to the bottom of the Z axes.
· Put your hands at each end of the linear module, then move the X-axis to the top.
· Locate the Y conversion cable and the attached cable on both axes, then connect them to the converter.
Visit the website for further instructions on the remaining procedure.
Komentarze